Turbine Blower consists of a dynamically balanced impeller which revolves in a stator-cum-compression chamber having very fine clearances between them. The impellers are fitted directly on the motor shaft.  For the purpose of reducing impedance to the air flow both the suction and pressure openings are located on the outer periphery of the stator thereby creating vacuum and pressure. There is no wear and tear.  Since the impeller rotates with no contact between itself and the casing no lubrication is required.

Specification :

Model	Motor	Capacity		Pressure		Vacuum	Height	Width	Length
	Kw/HP	M/Hr Max	CFM Max	M BAR Max	PSI Max	M BAR Max	H mm.	W mm.	L mm.
NS25-SS	0.18/0.25	50	29	60	0.84	50	250	253	250
NS50-DS	0.37/0.5	42	24	101	1.4	84	250	253	250
NS50-SS	0.37/0.50	90	53	90	1.26	76	320	310	305
NS100-DS	.75/1.0	77	45	151	2.1	126	320	310	305
NS-75-SS	0.55/0.75	120	71	125	1.75	105	345	335	335
NS-150-DS	1.1/1.5	102	59	210	2.94	175	345	335	335
NS-100-SS	0.75/1.0	200	118	140	1.96	118	360	330	365
NS-200-DS	1.5/2.0	170	99	235	3.29	195	360	330	365